Replacement Round FIBCs for 1,000 kg Scrap Handling
To replace a round scrap bag, send the empty sample, label and photos showing where it failed. A circular open-top catalog bag can help match the shape. Sharp offcuts need a separate review of contact points, puncture risk and handling conditions before you approve a loaded trial at your 1,000 kg target.
Before requesting a sample
- The starting specificationMeasure the existing bag laid flat and photograph its label, base and lifting loops. A tubular body can have a similar outline even when bottom seam and loop attachment differ.
- Inputs for your first reviewSend damage photos with scale and a brief note on where in the route the damage first appears.
The dimensions on the bag you already use
Qingdao Novapack Packaging Co., Ltd. manufactures woven polypropylene FIBCs in Qingdao, China. Tell us how you will fill and handle this bag so we can review the drawing, components and the checks you need on the selected build.
Measure the opening, finished height and base. Photograph the loop spacing, closure and seams while the bag is clean and empty. Keep the original identifier with the measurements.
A tubular body can have a similar outline even when bottom seam and loop attachment differ.
Use the result to rule out unmatched models before requesting a production quote.
Begin with a return sample and a representative photo set of the longest and sharpest offcuts. A load figure describes mass. Edge damage follows the actual shape and contact conditions.
Compare catalog candidates
| Catalog candidate | What the description shows | What to confirm for your order |
|---|---|---|
| White Circular Open Top PP Bulk Bags for Sand and Construction Waste | Round open-top construction with a flat base; 90 × 90 × 110 cm appears as a reference | The exact loop layout and scrap suitability need separate approval |
| Custom White Circular PP Jumbo FIBC with Open Top and Corner Loops | Circular open-top, closed-base option with a 1,000 kg listing | Use the label for reference and assess sharp metal against the proposed fabric and base |
Technical reference FIBCA safe-handling guidance
Tubular Body and Base Construction
A tubular woven body can avoid the vertical joins found in some panel designs. The sewn base and loop attachments still need review. Mark where sharp or long offcuts meet the fabric and ask for those areas on the sample drawing. The load rating and resistance to damage from your scrap are separate decisions.
Technical background PP tape for woven packaging and FIBC fabric
White Circular Open Top PP Bulk Bags for Sand and Construction Waste
FIBC Manufacturing and Quality ChecksA tubular body changes the side-seam layout, while the sewn base and loop joins still need separate review. Sharp metal can contact any of these points depending on how it falls.
Match the attachment arrangement in the sample to the product drawing and requested load evidence.
A round open-top design as the starting sample
The tubular bag in our catalog shows a possible outline for the replacement. Match the body, top and base to your sample and review the proposed fabric, sewing and loops in the drawing.
- Compare the current and proposed openingRecord the wide pieces and how material enters the bag. Keep a scale in the top and side photos so the conversion team can see whether loop placement obstructs filling.
- Acceptance recordDocument the loading opening and available lift clearance in the reference sketch.
Sharp edges in the material sample
Separate a representative set of the sharpest or longest offcuts for review. Your handling team can use those edges to assess whether a flexible bag candidate should proceed and which evidence is needed.
| Technical check | Flag blades, long edges and fragments that tend to turn sideways. Have your responsible team assess whether a flexible bag is suitable for those pieces before running a loaded trial. |
|---|---|
| For approval | Provide a representative offcut classification, including items excluded from the test. |
A safe decision about candidate containers
Consider your approved alternatives when torn bags or incompatible scrap make an FIBC unsuitable. Keep the site decision and its supporting records with the purchase request.
Agree how to observe tears or local puncture, seam changes and base wear, and when to stop a controlled comparison. Keep these process decisions with the site approver.
Identify the material geometry used on every sample inspection record.
Review of puncture and base contact
Once the site approves a trial, lay out what will be inspected at each stage. Include the bottom and contact points with hard edges alongside the drawing and sample code.
- Look at the underside with the bag emptyOn the empty sample, inspect the bottom join, seam intersections and known contact positions. After an approved test, have the responsible team assess changes only using safe site procedures.
- Acceptance recordPut these locations on a drawing so incoming inspection checks the same edges.
The 1,000 kg target and the proposed rating
We use the requested mass to review the build. The rating belongs to the confirmed configuration and its records, including how the bag is intended to be handled.
| Technical check | Document the exact construction by body, base and loops. Clear the rated model and the scrap suitability as separate decisions: both have to match the new use. |
|---|---|
| For approval | Ask for construction and marking records that identify the approved build. |
A sample record for the replacement order
Keep photos of the two bags, notes on the seams and sizing, and the retained sample. Record whether the project is going ahead, changing the design or staying with a different container.
- What a Japanese scrap enquiry requiredAn overseas replacement enquiry specified a round 1,000 kg single-use bag, open top, flat base and four lifting loops. The existing bag provided a physical shape reference and put puncture review on the agenda before selection.
- Acceptance recordFor a replacement, submit photos of the opening, base and label plus damage points. Keep your approval tied to the material geometry reviewed.
A review of your current scrap bag
Send the empty sample or clear photos, material shapes, target load and handling details. Include a marked picture of the failure the replacement needs to address.
Include the current failure mode, broadest and sharpest pieces, fill weight and lifting interface. Add photos of the empty base and a pallet or support drawing.
Ask the factory to identify a candidate and which features need an approved site trial.
Contact and Quote Details
Send your specification or a reference sample and include the order quantity and destination. Use the inquiry form to start your request. Send drawings or sample photos by email.
- Contact the Qingdao teamTell us what you pack or protect, and identify the operating condition that makes or breaks your purchase. Put the reference sample or drawing number in the message subject so it stays with the order.
- What the factory can reviewAttach the necessary evidence and ask for a sample, drawing review or quotation as the first deliverable.
Junfeng Road, Qingdao, Shandong, China
- [email protected]
- +1 404 203 0971
- Phone
- +86 18506421208
Continue your review
Match the approved sample and drawing to the specification, lot and packing marks.
Compare this guide’s equipment, material and sample checks with your requirements.
Include a drawing or current bag reference, what you pack, the equipment, quantity and delivery destination.